我国税制结构的优化

随着经济的发展和税源结构的变化，税制结构的调整显得十分必要和紧迫，笔者分析了制约我国税制结构优化的因素、税制结构优化的标准，现行税制结构中存在的主要问题，并对优化我国税制结构的措施提出了具体看法。     

无轴承开关磁阻电机拓扑及解耦机理分析

无轴承开关 磁阻电机（Bearingless switched reluctance motor ，BSRM）是一个多变量、非线性且强 耦合的复杂系统。为提高悬浮精度和发挥电机性能，需提升悬浮电流的跟踪及斩波控制水平 ，以及实现转矩与悬浮力的解耦控制，发展结构上具有自解耦功能的新型BSRM拓扑是解决该 问题的有效手段之一。根据现有BSRM转矩与悬浮力的解耦机理和构造特点，对结构上可解耦 的BSRM拓扑进行了归纳与分类，并对每种电机的结构、运行机理及优缺点进行了解析。有别 于现有电机结构，分别提出了双凸定子齿BSRM、宽转子齿BSRM、复合结构BSRM、锥形结构BS RM等4类具有自解耦特性的新型拓扑，并衍生出了每类结构下的不同实现形式，从而进一步 拓展无轴承电机的悬浮理论与应用范围。结合每类结构自身特点，构建与之相适应的运行模 式，以实现旋转和悬浮功能的解耦，从而强化其解耦应用特色。简要分析每种电机转矩和悬 浮力在结构上自解耦的机理，并利用有限元仿真验证其可行性。     

一种基于承载效率准则的复合材料机翼结构布局优化方法(英文)

提出一种针对大型复合材料机翼结构的二级布局优化策略。系统级根据结构形变调整设计指标,子系统级优化结构布局以满足系统级约束。将机翼壁板中各种临界失效载荷的接近程度作为评判结构效率的标准,通过将结构效率作为优化目标,保证了所求解问题的连续性。加筋壁板通过等效的正交异性板模拟,并根据能量原理预测总体失稳载荷。讨论了加强筋支持弹性对于蒙皮抵抗局部失稳性能的影响,并通过神经网络代理模型对其进行逼近。采用解析模型对失效特性做出评估,减少了计算资源的占用。最后以一种大型机翼结构的综合优化作为算例,计算结果满足设计要求,验证了该方法的可行性。     

对我国结构性生产过剩及其调整的认识

我国近年来经济发展中出现的生产过剩不同于资本主义国家经济危机时的相对过剩，而是我国经济发展中的结构性生产过剩，具有过渡的性质。这一现象的出现对传统经济理论具有挑战意义。本文试图对我国目前出现的结构性生产过剩的原因作出探讨，并对其调整提出对策。     

有源周期性结构控制电磁波反射波束指向研究

提出有源反射的概念.利用如光带隙电磁结晶结构、高阻抗结构等周期性结构的带隙特性和 阻抗特性,通过在类似高阻抗表面的周期性金属单元表面铺设有源器件--变容二极管,控 制周期性结构的性能,建立有源周期性结构,影响入射电磁波的传播特性,实现对反射波束 的指向的有源控制和有效改变.仿真实验证明采用单层或双层有源周期性结构表面,可以有 效控制反射波束的相位和角度指向.     

L10结构金属间化合物空位形成能

L1₀结构CoPt和FePt 薄膜因其高磁各向异性而成为新一代超高磁记录密度材料.采用Miedema理论计算了多种L1₀结构金属间化合物的空位形成能.研究结果表明:在这些金属间化合物中可能形成的空位类型,如FeNi和MnNi合金中易形成Ni空位;FePt和FePd合金中易形成Fe空位;CoPt合金中易形成Co空位;NiPt合金中易形成Ni空位;MnPt合金中易形成Pt空位;MnPd和MnHg合金中易形成Mn空位;MnRh合金中易形成Rh空位.这一研究结果为进一步研究开发高性能的磁性薄膜提供了理论依据.     

Cross-sectional deformation behavior of double-ridged rectangular tube with fillers in different stages of H-typed bending

The bent double-ridged rectangular tube (DRRT) with high forming quality is helpful to improve the microwave transmission accuracy. For reducing the cross-sectional deformation in the H-typed bending process, in addition to using rigid mandrel to support the inside of tube, ridge groove fillers are also added to restrict the deformation of ridge grooves. Because of the change of stress and strain state of bent tube in bending, rigid mandrel retracting and specially twice-springback stages, and the springback of fillers, the cross-sectional deformation of tube in each stage may be different. Therefore, based on the ABAQUS platform, the finite element models (FEM) for H-typed bending, mandrel retracting and twice-springback stages of H96 DRRT with fillers were established and validated. It is found that, for the height and width deformation of tube and spacing deformation of ridge grooves, retraction of mandrel can make the distribution of these deformations more uniform along the bending direction. The first springback can reduce these deformations significantly, which should be emphasized. But the second springback only increases them by less amount, which can be ignored. The smaller height deformation of ridge groove and filler can be neglected.     

Sensitivity analysis of flowfield modeling parameters upon the flow structure and aerodynamics of an opposing jet over a hypersonic blunt body

Implementation of an opposing jet in design of a hypersonic blunt body significantly modifies the external flowfield and yields a considerable reduction in the aerodynamic drag. This study aims to investigate the effects of flowfield modeling parameters of injection and freestream on the flow structure and aerodynamics of a blunt body with an opposing jet in hypersonic flow. Reynolds-Averaged Navier-Stokes (RANS) equations with a Shear Stress Transport (SST) turbulence model are employed to simulate the intricate jet flow interaction. Through utilizing a Non-Intrusive Polynomial Chaos (NIPC) method to construct surrogates, a functional relation is established between input modeling parameters and output flowfield and aerodynamic quantities in concern. Sobol indices in sensitivity analysis are introduced to represent the relative contribution of each parameter. It is found that variations in modeling parameters produce large variations in the flow structure and aerodynamics. The jet-to-freestream total-pressure ratio, jet Mach number, and freestream Mach number are the major contributors to variation in surface pressure, demonstrating an evident location-dependent behavior. The penetration length of injection, reattachment angle of the shear layer, and aerodynamic drag are also most sensitive to the three crucial parameters above. In comparison, the contributions of freestream temperature, freestream density, and jet total temperature are nearly negligible.     

涡轮叶片尾缘凹坑/凸起结构气膜冷却特性研究

为探究吸力面凹坑和凸起结构对涡轮叶片尾缘气膜冷却特性的影响,在吹风比M=1.1时(雷诺数Re=2.5×10~5),采用数值模拟方法,通过在叶片尾缘吸力面上加入凹坑或凸起,对涡轮叶片尾缘的冷却性能和流动机理进行了详细分析。结果表明:与原始结构相比,叶片尾缘凹坑和凸起结构提高了劈缝出口下游远距离端X/H6 (H为劈缝宽度,为4.8mm)区域气膜冷却效率,对下游的X/H6区域气膜冷却效率影响较小;三种叶片尾缘结构,沿着流向方向会产生由二维展向涡到发卡涡,再到流向涡的变化过程,凹坑和凸起结构通过抑制流体的扰动,改变流体流动情况,提高了劈缝出口下游远距离端气膜冷却效率。     

整体弹性结构法及在叶片流固耦合分析中的应用

针对三维叶片时域流固耦合振动响应计算普遍耗时的问题,采用一种假设整体结构的模态位移,求解固体时域响应和实现高效网格变形,发展了一种3维时域流固耦合分析的整体弹性结构方法,并应用于压气机叶片0°和180°相位角的气动稳定性分析中。结果表明,所发展方法的计算结果与传统双向时域算法和文献的结果较为吻合,而计算效率相比于传统算法显著提升;在所分析的两个相位角下,叶片振动的气动阻尼均随流量减小先增大后降低,相比于0°相位角,180°下叶片的气动稳定性大幅提高,表明该方法能有效应用于叶片的工程流固耦合研究。